Bostik Bosti-Set
Click to enlarge

Bostik Bosti-Set

Manufacturer: Bostik Smart Adhesives
Product ID: ASBO5001
Price: $195.99

Purchase

Description

Bosti-Set™ is a one-component, non-sag, easy to trowel adhesive that is specifically formulated for the installation of thin (gauged) porcelain tile panels on interior, vertical surfaces or counter tops. Bostik's patent pending Tenirex™ Polymer Technology used in this product is a revolutionary, proprietary formulation found only in Bosti-Set™. Tenirex™ Polymer Technology provides the adhesive remarkable instant grab and holding power, enabling panels to be rapidly set on walls and repositioned for up to 30 minutes with no slip or sag. Bosti-Set™ requires only a single coat application for faster and easier installation than a conventional mortar installation and holds thin porcelain tiles as large as 1/4" x 5' x 10' (6mm x 1.5m x 3m). Once cured, Bosti-Set™ has a tenacious bond that remains tough, yet flexible for durability and sound abatement. This unique formulation is also easy to clean off tile surfaces before and after cure without the need for water or solvents. Bosti-Set™ contains 0% solvents, zero VOC (as calculated per SCAQMD Rule 1168) and is low-odor. 


Use Bosti-Set™ on your next project to realize the following benefits:

  • Non-sag, instant grab of thin porcelain tile panels in sizes as large as 1/4" x 5' x 10' (6mm x 1.5m x3m).
  • Trowel only on the back of the panel, eliminating the troweling of mortar on walls.
  • Installation time reduced by as much as 50%, with half of the crew typically needed for typical mortar installations.
  • No mixing, no water, and no electricity needed to install the panels.
  • Exceptional acoustic performance and long-term durability of the wall system.
  • Installation materials that weigh up to 80% less than traditional mortar installations.
  • The ability to position panels up to 30 minutes while still preventing sagging.
  • With 2% recycled material, 0% solvents, and zero VOC’s (Volatile Organic Compounds - as calculated per SCAQMD Rule 1168), Bosti-Set™ contributes toward LEED® credits under sections NC-v4 MR4.2: Recycled Content and NC-v4 EQ4.1: Low-Emitting Materials – Adhesives & Sealants.


Installation Protocol

Install with Qualified Labor: It is strongly recommended to use professional contractors specifically trained to install thin porcelain tile panels.

Use Environments

  • New construction
  • Remodel
  • Residential
  • Light commercial
  • Heavy commercial
  • Offices
  • Hospital
  • Multifamily high-rise
  • Shopping malls
  • Intermittent wet areas (vertical only)


Approved Substrates, Wall Only

  • Drywall
  • Masonry
  • Roller-applied acrylic waterproofing membranes and sheet membranes
  • Fiberglass
  • Well-bonded clean ceramic tile
  • Exterior grade plywood
  • Steel
  • Aluminum
  • Stone
  • Coated metals
  • Epoxy
  • Concrete
  • Cement board


Tile Panel Types

  • Thin porcelain tile panel
  • Epoxy/Fiberglass-backed thin porcelain tile panel
  • Urethane/Fiberglass-backed thin porcelain tile panel


Packaging

Available in 4-gallon pails. Weight: 53.20 lbs/pail


Take Note

  • Shipping is at an additional cost. Please contact us for more information.
  • Orders of Hydrogen Vivid takes 5 to 10 days to deliver. 

Comment on Facebook

Product Reviews

Login or Register to write the first review.